English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
TP309s / 310s Stainless Steel U Bend Heat Exchanger Tube, ASTM A269 Welded Tube For Boiler
SSHEWT12
Material: 309/309S/309H, 1.4833; 310/310S/310H,1.4845;
Get Quote
TP309s / 310s Stainless Steel U Bend Heat Exchanger Tube, ASTM A269 Welded Tube For Boiler
Our heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products .
Chemical Composition :
| Material | ASTM A269 Chemical Composition % Max | ||||||||||
| C | Mn | P | S | Si | Cr | Ni | Mo | N B | Nb | Ti | |
| TP304 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-11.0 | ^ | ^ | ^. | ^ |
| TP304L | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-12.0 | ^ | ^ | ^ | ^ |
| TP316 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ^ | ^ | ^ |
| TP316L | 0.035 D | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-15.0 | 2.00-3.00 | ^ | ^ | ^ |
| TP321 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-12.0 | ^ | ^ | ^ | 5C -0.70 |
| TP347 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-12.0 | 10C -1.10 | ^ |
Grade:TP 304; TP304H; TP304L; TP316; TP316L; TP 321;TP321H; TP317L; TP310S; TP347H
Standard:ASTM A213, ASTM A 269, ASTM A 270,EN10216-5; ASTM B 622;ASTM B516;ASTM A789, etc
Size: OD:3.18-101.6mm
WT:0.5-20mm
Length: Max.12M
Application
a) For fluid & gas transport
b) Structure & machining etc
Advantages
a) Advanced technology of cold draw machine
b) Advanced annealing machine
c) Better mechanical property
d) More precise dimension
e) Perfect inspection method and inspection equipment etc
Process :
1 . We use Cold Drawn techonology to produce U bend tube
2 . U bend tubes produce will accordance to customer's drawings
3 . To avoid oxidation , inert gas (Argon) is passed through tubes ID at the required flow rate
4 . The radius is checked for its OD and wall thinning with the recommended specification
5 . We'll choose three different position or as customer's require to make sure tubes quality . We'll do physical properties and micro-structure test
6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test
7 . Each tube is then hydro tested at the recommended pressure to check for leakage
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Welded Pipe: Welded Tube
UNS S31803 / S32205 / S32750 Duplex Steel Welded Tube For Heat Exchanger
1.Material Grade S32205, S31803, S32304, S32750, F51, F53, 2205, 2507 etc 2.Outer Diameter3.18mm to 101.6mm 3.Wall Thickness 0.5mm to 20mm 4.Length Normally fixed length 6m, can as per customer’s requirement 5.Standard ASTM A789; ASTM A790; EN 10216-5ect. 6.Process Method Cold Drawn or Cold Ro......
4.76mm TP316L / 1.4404 Stainless Steel Straight Heat Exchanger Welded Tube
Our heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products . Application a) For fluid & gas ......
ASTM A213 TP304 / 304L Stainless Steel Bright Annealed Welded Tubing For Oil And Gas
1 . Grade : TP304 , TP304L , TP304H , TP316 , TP316L , TP316Ti , TP309S , TP310S , TP321 , TP321H , TP347 ,TP347H , etc 2 . OD ( Outer Diameter ) : 5.80mm to 2032mm ( 0.23 inch to 80 inch ) 3 . WT ( Wall Thickness ) : 0.25mm to 28mm ( 0.01 inch to 1.125 inch ) 4 . Length : According to customer's......
